Compact Scaler Switcher
Altimium 11 www.altimium.com
priority (from INPUT 1 to INPUT 5). It will output the signal firstly detected to be
available.
Notice
: Auto-switching function works only when there is new input signal, or when
users remove a signal or power rebooting. With any VGA port set to AV or YPbPr, the
system will be not able to enter in Auto-switching mode.
Operation Examples
:
Connect the INPUT 2, INPUT 4, and INPUT 5 ports to the source devices, select
INPUT 4 to outputs.
Press and hold on the front key
SOURCE/AUTO
for
7 seconds or more
to enter in
auto-switching mode.
With no signal removing or new input, SCA51D just works in auto-switching mode,
and take no action (Output from INPUT 4)
Connect INPUT 3 with a source device, and then it will choose INPUT 3 to output.
Remove the signal of INPUT 3, SCA51D will detect from INPUT 1 to INPUT 5. And
when it detects that input 2 is available, it will choose INPUT 2 to output.
Cut off the power of SCA51D, then reboot. As SCA51D is in auto-switching mode,
then it will choose INPUT 2 to output.
4.1.3 Software Updating
Software updating means to update the inside program of this scaler switcher.
SCA51D supports software updating via USB flash disk. The Operation is:
1)
Copy the file “
MERGE_51D.bin
” to the root directory of a USB flash disk. (Make sure
the file is copied to the root directory for normal use.
2)
Plug the USB flash disk to the SCA51D USB port on its front panel.
3)
Press the button “MENU” for
7 seconds or more
to update the software
automatically.
Or press this button for 1 second to open the OSD menu
“Option”
Select
“Software Update” to enter in update procedure.
Or send command
50698%
to update software.
4.1.4 Volume Adjusting
Not in OSD menu, press VOL -- to decrease line volume, VOL + to increase.
Not in OSD menu, press MIC
– to decrease MIC volume, MIC + to increase.
4.1.5 Operations in OSD Menus
Press
MENU
button to enter in the OSD menu, and use
UP
,
DWON
,
LEFT
,
RIGHT