Altitude Dream O2 Technology Dream Cap User Manual Download Page 4

Page: 4 / 4

Step 3: Connecting Your Altitude Generator

Insert the end of the tubing from your Altitude generator through either of the holes on the

side of your DREAM CAP. If you’re using an Everest Summit II, then connect your HEPA filter

to the end of the tube once it’s inside the DREAM CAP. Make sure the holes are sinched

and sealed tightly in order to effectively reach and remain at your desired altitude.

Thank you for your purchase!

If you have any questions concerning your Dream Cap, contact us via email or phone.

We are here to help take your training to the next level!

Care

Allow your DREAM CAP to air out when not in use. Wipe down the DREAM CAP fabric from

time to time with an anti-bacterial soap or wipe to keep it clean.

Altitude Dream O

Technology

DREAM CAP USER MANUAL

Summary of Contents for O2 Technology Dream Cap

Page 1: ...hments is intended only for the person s or entity to which it is addressed and may contain confidential and or privileged material Any review retransmission dissemination or other use of or taking of...

Page 2: ...by step instructions with pictures on how to set up your DREAM CAP how to connect your altitude generator and best care practices Parts DREAM CAP fabric one included Aluminum arcs two included Unpack...

Page 3: ...each slot until it reaches the back corner Then secure the velcro on the front corner slot openings to keep the arc in place Note You may have to apply some pressure to close the velcro Repeat with t...

Page 4: ...sure the holes are sinched and sealed tightly in order to effectively reach and remain at your desired altitude Thank you for your purchase If you have any questions concerning your Dream Cap contact...