3
Assembly
Step 1: Structure the Arcs
Snap the disassembled aluminum arcs into arc shapes by linking the segments.
Step 2: Slot Arcs into Fabric
Locate the two slot openings on the side corners of the DREAM CAP fabric. Slide one arc
through each slot until it reaches the back corner. Then secure the velcro on the front
corner slot openings to keep the arc in place. (Note: You may have to apply some
pressure to close the velcro.) Repeat with the other arc in the other slot. One slot has a
break in the middle. This is necessary so the arcs can cross at the top of the DREAM CAP.
Slot opening
Velcro
Arcs cross on top of DREAM CAP
Altitude Dream O
2
Technology
DREAM CAP USER MANUAL