- 10 -
9
Error and self-inspection
9.1 Error
：
Treadmill gives the following error code if anything wrong
，
please contact service people
soon if it happens
9.2 Self-inspection
No need to self-inspect unless special situation. If necessary, please do it under the
instruction of professional technical people or sales because of the high voltage.
a.
open the red power switch, pull out the safe key
b.
Press the “start” and ”speed +” key at one time until the safe key has been put on,then
press the “mode” key
c.
after the LCD display finished, then press the “mode” key again.
d.
the treadmill runs from the lowest speed to highest speed , Then treadmill stopped.
The whole self-inspection process takes about 2 minutes
E-0C
