TNP600
User’s Guide
400-0493-004
9
7. Operation
7.1 Opening and Closing the TNP600
The TNP600 will open easily when the top is pressed down
and then released.
When the TNP600 is not in use, simply press the top down
until it is level with the surface of the table and then release.
The unit will remain hidden until needed again.
7.2 Power/Signal Connections
Connect external devices to the appropriate connector on the
TNP600. Remember, the devices plugged into the AC power
connectors should not draw more than 600W of power
.
8.
Troubleshooting
Guide
The TNP600 supplied was carefully tested and no problems
were detected. However, we would like to offer the following
suggestions:
•
Please make sure that the highest quality network cables
are used.
•
Make sure that no cable or power cord is damaged or
pinched. If there has been damage, do not use the
TNP600. Please call the Altinex Customer Service
Department at (714) 990-2300 to have the unit repaired.
•
If the unit does not rise into position correctly, check the
service loops for the signal and power cords on the bottom
of the unit
