SWITCHER
400-0426-006
9
Cause 3:
Signal is bad or missing.
Solution 1:
Make sure the switcher output is
connected to the monitor. If there is
still no display, see Solution 2.
Solution 2:
Remove both inputs to the switcher
and connect the active signal from
the source to Input 2. If there is still
no display, see Solution 3.
Solution 3:
Bypass the switcher and connect the
output of the source directly to the
monitor. If the display is good, then
call ALTINEX at (714) 990-2300. If
there is still no display, see Cause 4.
Cause 4:
Cable connections are incorrect.
Solution:
Make sure the cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no display present, see
Cause 5.
Cause 5:
The display has a problem.
Solution:
Make sure the display is powered
and is turned on. If there is still no
display, please call ALTINEX at
(714) 990-2300.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
www.altinex.com
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL:
714 990-2300
TOLL FREE:
1-800-ALTINEX
WEB:
www.altinex.com
E-MAIL:
