RT300-121
User’s Guide
400-0602-002
8
7. Operation
7.1 Accessing the RT300-121 VGA Cable Retractor
After installation, no further configuration is needed. To
connect, simply open the CNK bezel and pull on the retractable
cable.
Connect to a desired source. When finished, disconnect the
cable and gently pull and release cable and it will retract back
into the bezel.
8. Troubleshooting Guide
The RT300-121 VGA cable retractor was carefully tested
during production. We would like to offer the following
suggestions:
•
Make sure that the cable or power cord is not
damaged or pinched. If there has been damage, do
not use the CNK200 or the retractable cable.
•
RT300-121 is a precision cable retractor. Once the
cable reaches the end, do not continue pulling on it.
Doing so will damage cable and the retractor
assembly.
•
Please call the Altinex Customer Service Department
at (714) 990-2300 to have the unit repaired
.
