Take the top cover out of the packaging bag
and install it on top portion of the unit.
Do not install with screws yet, wait til step6.
Secure the mounting panel with unit under the table
using provided screws 3/4" long. Use screws
as specified on labels in the plastic bags
provided in the kit. The mounting screws
that are provided with the unit
should not be used on tables less than
3/4" thick.
Once the initial cut-out has been made to the table,
use metal template provided by Altinex to find the
location of the pilot holes. Mark the location with
a fine marker or pen.
Pre-drill pilot holes 10 times in the marked
locations for a #6 wood screw
(leave extra holes incase needed in the future use)
:
softwood Ø1/16",
hardwood Ø5/64"
The pilot holes should be
around .375" inches deep.
ALTINEX, INC. IS NOT RESPONSIBLE
FOR ANY DAMAGE TO A TABLE OR DESK.
R
Document p/n:
250-0858-003
Page 2 of 4
(provided w/unit)
