Altinex MX2436RM, User Manual

Page: 4 / 15

SWITCHERS
3
required to correct the interference at his own
expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
ABOUT YOUR MX2436RM 2
The MX2436RM is Video and Audio Switcher
designed to handle the switching requirements of
several multimedia applications.
The MX2436RM offers six BNC inputs with ground
loop isolation, which promote individual equalization
of video gain according to different cable lengths.
Each of the BNC inputs can be connected to a
single BNC output. The
MX2436RM also provides
six stereo or balanced audio inputs, which can be
connected to a single stereo or balanced audio
output.
The MX2436RM allows the non-simultaneous
connection of six video sources to a monitor or
projector and six audio sources to any audio system.
In addition, the
MX2436RM is controllable using its
built-in front panel or through RS-232.
Using optional hardware, the MX2436RM can be
rack mounted alone as a single unit or two units can
be rack-mounted side by side.
TECHNICAL SPECIFICATION 3
FEATURES/
DESCRIPTION
Audio Video
GENERAL
Inputs
6 8
Input
Connector Six 5 conductor
terminal blocks
Eight BNC Female
Outputs 1 1
Output
Connector One 5 conductor
terminal block
One 15-pin HD
Female connector
Compatibility
Stereo or balanced
audio
NTSC, PAL,
SECAM, High
Resol. Mono.
Comp. Video
(R-Y, B-Y)
Table 1. MX2436RM General
MECHANICAL MX2436RM
Width (inches) 1.75in (44mm)
Height (inches) 17.00 in (432mm)
Depth (inches) 9.00in (229mm)
Weight (pounds) 5lbs (2.28kg)
Finish Gray
Front/Back Panels Lexan
T° Maximum 50°C
Humidity 90% non-condensing
MTBF (calculations) 40,000 hrs (min)
Table 2. MX2436RM Mechanical
ELECTRICAL Audio Video
Input Signals
Differential 1.8V p-p -
Composite Video - 1.5V p-p
Impedance 10 k Ohms 75 Ohms
CMRR
80dB @ 10 Hz to
20k Hz
-
Output Signals
Analog
-
1.5V p-p
Fall/ Rise
Time(ns) - less than 2.4ns
Impedance 600 Ohms 75 Ohms
Crosstalk 80 dB @ 1kHz -
Differential 1.8Vp-p -
Signal to Noise
Ratio More than 95 dB
-
Bandwidth 10 Hz – 40 kHz 300MHz
Stereo Signal
Separation More than 60dB
@ 20 kHz
-
Frequency Compatibility
Horizontal - 15-200kHz
Vertical - 47-200Hz
Power
External Power 90V AC to 260V AC 50/60Hz
Power
Consumption
14 watts max
Table 3. MX2436RM Electrical