MULTITASKER
400-0394-007
21
TROUBLESHOOTING GUIDE
8
We have carefully tested and have found no
problems in the supplied
MT106-103
. However, we
would like to offer suggestions for the following:
8.1 NO DISPLAY
Cause 1:
The source has a problem.
Solution:
Check the source and make sure
that there is a signal present and all
source connections are correct. If
the source is working and there is
still no display, see Cause 2.
Cause 2:
The card output is not selected.
Solution:
Select the card output. See RS-232
accessible commands in Section 7.
If no display is present, see
Cause 3.
Cause 3:
Cable connections are incorrect.
Solution:
Make sure that cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no display present, see
Cause 4.
Cause 4:
The display has a problem.
Solution:
Make sure the display is powered
and is turned on. If there is still no
display, please call ALTINEX at
(714) 990-2300.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website
at
www.altinex.com
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL:
714 990-2300
TOLL FREE:
1-800-ALTINEX
WEB:
www.altinex.com
E-MAIL:
