MULTI-TASKER
10
14. [G]
This command is used to request group data.
With the command, the user can identify which
input or output of a particular group is on.
Command Format: [GkUi]
k
= group number (k = # from 1-9)
i
= unit number (i = # from 0-9)
Example:
If group 1 has DA Cards with outputs 1 and 2
on, while group 2 has SW Cards with input 2 on:
[G1]:
will return feedback as
ON12 G1U0.
[G2]:
will return feedback as
ON2 G2U0.
15. [RD]
This command displays the members in each
group. Members can be any card in enclosure
slots 1 to 19.
Command Format: [RDGkUi]
k = group number (k = # from 1-9)
i = unit number (i = # from 0-9)
Example:
To read member data for group 1 of unit 1, send
the [RD] command. The system will return
feedback as C1C2C3 G5U1.
7.3 SUMMARY OF COMMANDS
1)
[VER]
Receives software version
2)
[C]
Receives status of the card
3)
[CiS]
Save card configuration
4)
[SIGCi] Check for input signal
5)
[ON]
Turns on one or more outputs for
a single card or a group of cards
6)
[OFF]
Turns off one or more outputs for
a single card or a group of cards
7)
[…S]
Save the command configuration
8)
[…F]
Provides feedback upon sending
9)
[…P]
Sets the path, preload for [SW]
10) [SW]
Switch, preloaded outputs
11) [HELP] Display available commands
12) [WR]
Groups multiple cards
13) [CLR]
Clears members of a single
group or all groups
14) [G]
Requests group data
15) [RD]
Displays group members
