background image

SPECIAL APPLICATION

400-0430-001

8

TROUBLESHOOTING GUIDE

8

We have carefully tested and have found no 
problems in the supplied 

DA203-101.

However, we 

would like to offer suggestions for the following:

8.1 NO DISPLAY

Cause 1:

The source has a problem.

Solution:

Check the source and make sure 
that there is a signal present and all 
source connections are correct. If 
the source is working and there is 
still no display, see Cause 2.

Cause 2:

The path has a problem.

Solution:

Connect the source  directly to the 
display device, bypassing the 

DA203-101

. If the image is good, 

see Cause 3.

Cause 3:

Cable connections are incorrect.

Solution:

Make sure that cables are properly 
connected. Also, make sure that the 
continuity and wiring are good. If 
there is still no display present, see 
Cause 4.

Cause 4:

An adjustment is out of tolerance.

Solution:

Make sure the SYNC TH is set to 50 
and that the MAIN EQ is set to zero.  
Slowly adjust the SYNC TH up and 
down from 50 to see if the image 
appears. If there is still no display, 
see Cause 5.

Cause 5:

The display has a problem.

Solution:

Make sure the display has power 
and is turned on.  If there is still no 
display, please call Altinex at 
(714) 990-2300.

8.2  NO SOUND

Cause 1:

The source has a problem.

Solution

:

Check the source and make sure 
that it is working at an appropriate 
volume 

level and all source 

connections are correct. If the 
source is working and there is still 
no sound, see Cause 2.

Cause 2:

Cable connections are incorrect.

Solution:

Make sure that cables are 
connected properly. Also, make sure 
that the continuity and wiring are 
good. If there is still no sound 
present, see Cause 3.

Cause 3:

Destination amplifier has a 
problem.

Solution 1:

Make sure that the destination 
amplifier is powered. If there is still 
no sound, see Solution 2

Solution 2

: Set the volume of the destination 

amplifier to a reasonable level. If 
there is still no sound, call ALTINEX 
at (714) 990-2300.

ALTINEX POLICY

9

9.1  LIMITED WARRANTY/RETURN POLICY

Please also see the Altinex website at 

www.altinex.com

for details the on warranty and 

return policies.

9.2  CONTACT INFORMATION

ALTINEX, Inc.

592 Apollo Street

Brea, CA  92821 USA

TEL:

714 990-2300

TOLL FREE:

1-800-ALTINEX

FAX:

714-990-3303

WEB:

www.altinex.com

E-MAIL:

[email protected]

Summary of Contents for DA203-101










Reviews: