DISTRIBUTION AMPLIFIERS
6
INSTALLING YOUR DISTRIBUTION
AMPLIFIER
6
Step 1.
Make sure that the proper power supply
is being used with the unit. The use of
an incorrect power supply can result in
equipment damage not covered by
warranty.
Step 2.
Connect the power cord to the unit and
plug it into the power outlet. The power
indicator LED on the front panel will
light. This indicates that the unit is
operational.
Step 3.
Connect the high resolution RGsB or
RGBS source to the
DA1206RM
using
coaxial cable with BNC connectors,
making sure that the colors match
correctly. Then connect one or two
monitors or projectors to the output(s) of
the
DA1206RM
. The monitors or
projectors must be scan-rate compatible
with the source signal - the
DA1206RM
does not affect scan rate.
Step 5.
If the image is less than perfect, check
all of the connections. Also, check the
settings of the switches. The default
setting is Sync Polarity (+), Sync Level
(4V), Video Level (0.7V). Check all of
the connections. The unit is very reliable
and seldom will be the cause of
malfunction. Poor quality cables may
often degrade the performance of the
product. Make sure that the cables used
are coaxial cables and that all pins are
in good condition.
CONGRATULATIONS! YOU ARE DONE.
OPERATION
7
The settings of the
DA1206RM
Distribution
Amplifier can be adjusted using Input Termination,
Video Level, and Sync Level switches as described
in Section no. 4. There are no other adjustments
necessary to operate the unit. The
DA1206RM
will
operate successfully as long as cables are
attached properly and other technical specifications
are followed.
ACCESSORIES
8
Model No.
Description
TABLE MOUNT BRACKET
TM1276
Table Mount Bracket for 2U High, ½
rack units
RACK MOUNTING BRACKETS
DA1298RM
Rack Mount shelf for two units
DA1299RM
Rack Mount shelf for single unit
POWER CABLES
PC5301US
9V 500mA Power Supply for US
PC5302UK
9V 500mA Power Supply for UK
PC5303AU
9V 500mA Power Supply for Australia
PC5304GR
9V 500mA Power Supply for Germany
HIGH RESOLUTION 4 BNC to 4 BNC
COAXIAL CABLE
CB4100MR
Bulk Cable 4 coaxes (500ft minimum)
CB4103MR
3 feet, 4 BNC to 4 BNC coaxial cable
CB4106MR
6 feet, 4 BNC to 4 BNC coaxial cable
CB4112MR
12 feet, 4 BNC to 4 BNC coaxial cable
CB4125MR
25 feet, 4 BNC to 4 BNC coaxial cable
CB4150MR
50 feet, 4 BNC to 4 BNC coaxial cable
CB4175MR
75 feet, 4 BNC to 4 BNC coaxial cable
CB41100MR
100 feet, 4 BNC to 4 BNC coaxial cable
CB41150MR
150 feet, 4 BNC to 4 BNC coaxial cable
SUPER HIGH RESOLUTION 4 BNC to
4 BNC COAX CABLE
CB4300MR
Bulk Cable 4 coaxes (500ft minimum)
CB4306MR
6 feet, 4 BNC to 4 BNC coaxial cable
CB4312MR
12 feet, 4 BNC to 4 BNC coaxial cable
CB4325MR
25 feet, 4 BNC to 4 BNC coaxial cable
CB4350MR
50 feet, 4 BNC to 4 BNC coaxial cable
CB4375MR
75 feet, 4 BNC to 4 BNC coaxial cable
CB43100MR
100 feet, 4 BNC to 4 BNC coaxial cable
CB43150MR
150 feet, 4 BNC to 4 BNC coaxial cable
If you experience any problems, please call
1-800-258-4623 or 1-714-990-2300 for
international calls.
