background image

DISTRIBUTION AMPLIFIERS

400-0004-004

2

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your

DA1804NT 

and keep it handy for future reference. 

These safety instructions are to ensure the long life 
of your 

DA1804NT

and to prevent fire and shock 

hazards. Please read them carefully and heed all 
warnings.

1.1  GENERAL

Qualified ALTINEX service personnel or its 
authorized representatives must perform all 
service.

Connect the unit to a properly rated supply 
circuit.

1.2  HANDLING

Handle the 

DA1804NT 

carefully. Dropping or 

jarring can damage internal components.

For best results, place the 

DA1804NT

on a flat, 

level surface in a dry area away from dust and 
moisture.

To prevent fire or shock, do not expose this unit 
to water or moisture. Do not place the 

DA1804NT

in direct sunlight, near heaters, or 

heat-radiating appliances, or near any liquid. 
Exposure to direct sunlight, smoke, or steam can 
harm internal components.

Do not pull the cables that are attached to the

DA1804NT

.

To turn off the main power, be sure to remove 
the cable from the power outlet. The power 
outlet socket should be installed as near to the 
equipment as possible and should be easily 
accessible.

1.4  CLEANING

Clean only the connector area with a dry cloth. 
Never use strong detergents or solvents such as 
alcohol or thinner. Do not use a wet cloth or 
water to clean the unit. Do not clean or touch 
any component or PCB.

1.5  FCC NOTICE

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial 
environment. This equipment generates, uses, 
and can radiate radio frequency energy and if 
not installed and used in accordance with 
instructions found herein, may cause harmful 
interference to radio communications. Operation 
of this equipment in a residential area is likely to 
cause harmful interference in which case the 
user will be required to correct the interference 
at his own expense.

Any changes or modifications to the unit not 
expressly approved by ALTINEX, Inc. could void 
the user’s authority to operate the equipment.

Summary of Contents for ALTINEX DA1804NT









Reviews: