3x1 Wallplate Transmitter Switcher with HDMI and VGA
Altimium 4 www.altimium.com
3. Panel Description
3.1 Front Panel
①
IR:
Built-in IR sensor to receive IR signal from IR remote to control display.
②
HDMI IN 1:
Type-A HDMI port to connect HDMI source.
③
HDMI IN 2:
Type-A HDMI port to connect HDMI source.
④
VGA IN:
Female 15-pin VGA port to connect VGA source.
⑤
Audio IN:
3.5mm mini jack to connect an audio source for VGA.
⑥
SOURCE AUTO:
Press the backlit button to select the next input source.
Press and hold the button at least 3 seconds to enable auto switching mode.
For more details, please refer to the
on the page 8.
⑦
Input LED:
V:
The LED illuminates green to indicate the VGA input is selected.
H 1:
The LED illuminates green to indicate the HDMI 1 input is selected.
H 2:
The LED illuminates green to indicate the HDMI 2 input is selected.
⑧
DISPLAY ON/OFF:
Turn the display ON or OFF via CEC or RS232 (Programming
required). For more details, please refer to the
on the page 8.
⑨
LINK LED:
The LED illuminates green to indicate a valid data link with the
HDBaseT receiver.
1
2
3
5
4
8 9
6 7
