Altimium TP70WP, User Manual

Page: 9 / 16

HDBaseT Wall Plate Receiver
Altimium 5 www.altimium.com
Step4. Connect a control terminal (e.g. a PC) to the RS232 port of either HDBaseT
Twisted Pair PoC Transmitter or TP70WP.
Step5. Both HDBaseT Twisted Pair PoC Transmitter and TP70WP have IR IN and IR
OUT sockets. When one model is used for IR signal receiver, the IR signal must
be sent out by the other model.
For example
: When “IR IN” of TP70WP connects with an IR receiver, the IR
emitter must connect to IR OUT of HDBaseT Twisted Pair PoC Transmitter.
Step6. Connect a DC 24V power adaptor to the power port of HDBaseT Twisted Pair
PoC Transmitter.
Note: IR& RS232 signal can be transmitted bi-directionally between TP70WP and
HDBaseT Twisted Pair PoC Transmitter.
3.4 PoC/ PoE Solution
Apart from power supply, TP70WP can be energized by far-end devices that support
PoC/ PoE, which increases the system flexibility.
Connect the receiver and far-end device (exampled by HDBaseT Twisted Pair PoC
Transmitter) via a CAT5e/6 cable as below:
Figure 3- 2 PoC Solution
AV and IR& RS232 control signal can also be transmitted via the cable.
Note: TP70WP supports unidirectional PoC/ PoE, i.e, TP70WP can get power from
far-end PoC/ PoE devices.
3.5 Application
TP70WP has a good application in various occasions, such as computer realm,
monitoring, conference room, big screen displaying, television education, command &
control center and smart home etc.