HDMI 2.0 1x2 Splitter
6
Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
1) Connect the splitter to the PC with USB cable.
2) Power on the splitter, and then the PC will automatically detect a U-disk named of
“BOOTDISK”.
3) Double-click to open the U-
disk, a file named of “READY.TXT” will be showed.
4) Copy the
latest upgrade file (.bin) to the “BOOTDISK” U-disk directly.
5)
If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the firmware
was upgraded successfully. If the firmware upgrade failed, please check the file (.bin)
and then follow the above procedure to operate again.
6) Remove the USB cable after firmware upgrade.
System Connection
The following diagram illustrates the typical input and output connection of the splitter:
1
2
IN
4K/60 Blu-ray
1080p Display
Down Scaling
4K@60 4:4:4 HDR
4K/60 Display
