HDMI 2.0 1x2 Splitter
3
Product Introduction
Thanks for choosing the HDMI 2.0 1x2 Splitter, which can distribute one HDMI input to
two outputs. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080p
3D, and multichannel audio formats. Besides passing EDID information from the display,
there are multiple built-in EDID settings can be selected by the 4-pin DIP switch on the
front panel. Moreover, the splitter supports convenient firmware upgrade through
Micro-USB port.
Features
⚫
Supports HDMI 2.0 and the video resolution up to 4K@60Hz 4:4:4.
⚫
HDMI input supports HDCP 2.3 and the outputs support HDCP Active or HDCP
Passive mode.
⚫
Supports video resolution down-scaling, the 4K input can be automatically degraded
to 1080p output for compatibility with 1080p display.
⚫
18Gbps high bandwidth.
⚫
Advanced EDID management: multiple built-in EDID settings can be selected.
⚫
Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
⚫
Supports CEC pass-through.
⚫
Provides LEDs to indicate the current operating status.
⚫
Firmware upgrade by Micro-USB port.
Panel Description
Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
INPUT LED:
The LED illuminates blue when there is HDMI input.
③
OUTPUT LEDs:
The LED illuminates blue when there is HDMI output on the
corresponding channel.
④
EDID:
4-pin DIP switch for EDID setting and HDCP mode selection. Please refer to
for more details.
⑤
FW:
Micro-USB port for firmware upgrade.
IN
FW
1
2
1 2
3
4
EDID
ON
OFF
1
0
1
2
3
4
5
