6x2 4K Presentation Switcher with Matrix Outputs
Altimium
www.altimium.com
7. RS232 Control
The switcher can be controlled by sending RS232 commands. As RS232 signal can be
transmitted from the switcher to HDBaseT receiver, so it is able to control a far-end
third-party device based on RS232 pass-through function.
The baud rate can support 2400, 4800, 9600(default), 19200, 38400, 57600 or 115200.
7.1 RS232 Control Software
Installation:
Copy the control software file to the computer connected with the
switcher.
Uninstallation
: Delete all the control software files in corresponding file path.
Basic Settings:
First to connect the switcher with all input devices and output devices needed, then to
connect it with a computer which is installed with RS232 control software.
Double-click the software icon to run this software. Here we take the software
CommWatch.exe
as example. The icon is shown as below:
