Compact Scaler Switcher (with PoH)
Altimium 7 www.altimium.com
Step5.
Connect a HDMI display device to HDMI output port with HDMI cable.
Step6.
Connect HDBaseT Receiver (such as TP411R-4K) to HDBT output port with
twisted pair.
Step7.
Connect speaker, headphone or AV amplifier to AUDIO OUTPUT port.
Step8.
Connect control device (e.g. PC) to the TCP/IP port, SCA51TS can be controlled
via web-based GUI.
Step9.
Connect control device (e.g. PC) to the RS232 port of SCA51TS or the HDBaseT
Receiver (bi-directional RS232 control, either end is available).
Step10.
Connect IR receiver to the IR EYE port, SCA51TS can be control via IR
remote. For more details, please refer to
Step11.
Both SCA51TS and the HDBaseT Receiver have IR IN and OUT. When one
model is connected with IR receiver, the other model should connect with an IR
transmitter.
For example
: When “IR IN” of SCA51TS connects with an IR receiver, the IR
transmitter must connect to IR OUT of HDBaseT Receiver.
The IR signal can be transmitted bi-directionally between the SCA51TS and
the HDBaseT Receiver.
Step12.
Connect DC24V power adaptor to the power port (HDBaseT Receiver can be
powered by SCA51TS with PoH function).
Note:
If the power adapter is connecting with HDBaseT Receiver, SCA51TS
can’t be
powered from HDBaseT Receiver.
3.4 Connection of Microphone
SCA51TS provides with one 3-level microphone input port, to accommodate different
microphone input modes, including 48V phantom power mode, MIC mode & LINE mode.
48V phantom power Mode
48V phantom power input has a good frequency characteristic, high input impedance
and high sensitivity.
When switching
to “48V”, the MIC input will provide a 48V phantom power. This is only
used for
condenser microphone
.
Connect the microphone in this way
: “+” connects to positive, “-” connects to negative
and “
” to ground.
