Integrated Switching Power Supply
Altimium 3 www.altimium.com
No.
Name
Description
①
01~12
12 output channals.
A.
DC: 2-Pin phoenix connector, connect with the device
needed to be powered.
B.
SELECT: Press the TACT Switch to select the output
voltage among 5V, 12V, and 24VDC. In addition,
simultaneously long-press this buttons on channel 01 and
channel 02 for 3 seconds or more, the device will be
restored to factory setting.
C.
5/12/24V indicators:
Green when the current selected output voltage is
work normally.
Blinking slowly when the current channel is closed.
Blinking fastly when the current channel is short
circuit or over voltage.
②
RS232
Serial port, 3-Pin phoenix connector, connect with a control
device (such as PC) to control the product via RS232
commands.
③
TCP/IP
Ethernet port, connect with PC to control the product via
Web-based GUI.
④
AC1& AC2
2 AC input channels. Input voltage is AC100~240V.
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Summary of Contents for PWSU12
Page 27: ......
