Modular Matrix Switcher 16x16
Altimium 28 www.altimium.com
14
、
EDID management command:. EDIDM[X]B[Y].
Example: “EDIDM5B3.” to enable input 3 to learn the EDID data of output 5.
15
、
Command for signal cards: USER/[Y]/[X]*****.
Example: “USER/I/7:0623%;” to set the input 7 to support YPbPr signal, the card is
plugged in the second input slot of the matrix.
4.4. TCP/IP Control (Optional)
4.4.1. Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port
is 4001. IP & Gateway can be changed as you need, Serial Port cannot be changed.
Controlled by Single PC
Connect a computer to the TCP/IP port of the MATM1616, and set its network
segment to the same as the default IP of the MATM1616 (192.168.0.178).
Controlled by PC(s) in LAN
The MATM1616 can be connected with a router to make up a LAN with the PC(s), this
make it able to be controlled in a LAN. When control, just make sure the MATM1616’s
Same network
segment as the
switcher
Summary of Contents for MATM1616
Page 47: ......
