background image

4K 4x4 HDMI Matrix Switcher                                                                               

 

Altimium                                                            23                                    www.altimium.com 

 

Figure 4- 17 Password

 

In the above interface, turn on the Front Panel to lock all buttons of machine, they 
cannot be operated. 

4.3.4 TCP/IP Configuration 

IP address, subnet mask, and Gateway of MAT.HDMI44-4K can be modified via GUI 
from the above description, but beyond that users can configure the IP port, including IP 
reset, password reset, and IP module firmware update on the WebServer. 

Type the designed website (Default: 192.168.0.178:100, changeable) in your browser. 
Enter correct username and password to log in the WebServer:   

Username

: admin; 

Password

: admin 

Here is the main configuration interface of the WebServer: 

 

Figure 4- 18 TCP/IP Configuration 

4.3.5 GUI Update 

GUI for MAT.HDMI44-4K supports online update in http://192.168.0.178:100. Type the 

username and password (the same as the GUI log-in settings, modified password will 

be available only after rebooting) to log in the configuration interface. After that, click 

Return Button 

Summary of Contents for MAT.HDMI44-4K





































Reviews: