4K 4x4 HDMI Matrix Switcher
Altimium 8 www.altimium.com
Command
Function
Feedback Example
Demo.
Switch to the “demo” mode, convert
input and output in turn like 1B1,
1B
2, …4B3, 4B4, 1B1… and so on .The
switching interval is 2 seconds.
Switch to normal mode by pressing any
front panel button or sending any other
command
Demo Mode
[x]All.
Transfer signal from input x to all
outputs
1 To All.
All#.
Transfer all inputs to corresponding
outputs, like 1->1, 2->2
…
All Through.
[x]#.
Transfer signal from input x to output x.
1 Through.
All@.
Switch on all outputs.
All Open.
[x]@.
Switch on output x.
1 Open.
All$.
Switch off all outputs, but except coaxial
outputs for digital audio.
All Closed.
[x]$.
Switch off output x.
1 Closed.
[x]B[y1],[y2],[y3]
.
Transfer AV signal from input x to output
y1, y2, y3
1B2
BlackscreenON[
x].
Switch on input x.
BlackscreenON1.
BlackscreenOF
F[x].
Switch off input x.
BlackscreenOFF1.
Save[y].
Save the present operation status to
preset command y, y=0~11.
Save To F1
Recall[y].
Recall preset command y, y=0~11.
Recall From F1
Clear[y].
Clear preset command y, y=0~11.
Clear F1
EDIDG[x].
Get EDID data from output x and
display it on com port.
EDIDM[X]B[y].
Enable input x to learn the EDID data
from output y. If the EDID data is not
available, the matrix will set it to initial
EDID data.
EDIDM3B1
EDIDC[x]B[y].
Capture the EDID data of output x and
save it as No.y EDID, y=1~10,12~14
EDIDC3B1
EDIDExtract[x][y].
Invoke No.y EDID data saved through
COM port to input x, y=1~10,12~14
Pick up success
