Altimium AMP3V, User Manual

Page: 8 / 24

40W Power Amplifier
Altimium 4 www.altimium.com
2.2 Introduction of Rear Panel
Figure 2 Rear Panel
No. Name Function
①
Power
Indicator
Turns red when power on.
②
Microphon
e input port
3-pole captive screw connector for microphone input, the dial
switch in right side is to select the micro input kind, including
48V (for condenser microphone), MIC (for dynamic
microphone) and LINE (for line audio).
③
Audio
Inputs
3.5mm mini jack for stereo audio input, it can be connected with
audio source device such as DVD player.
④
ID Code
16 codes range from 0 to F (hexadecimal), works together with
the PC control software.
⑤
IR
To connect with the IR receiver, works together with the IR
remote.
⑥
Power Port To connect with the power adapter (DC24V).
⑦
2 x RCA
Dual-mono audio input, which can be connected with audio
source device such as a PC.
⑧
Digital
Audio Input
Fiber connector for digital audio input (PCM format only), it can
be connected with a device with fiber port, such as blue-ray
player.
⑨
RS232
3-pole captive screw connector for serial control, it can be
connected with PC (Use a 3-pole captive to 9 pin female D
connector and serial control software) to control AMP3V.
⑩
Audio
Output
To connect with audio output devices, such as speakers (To
select 70V or 100V depends on the input voltage of the
speakers). COM is for grounding (GND).
1
6
2
7
3
8
4
9
5
10