Altimium AMP3V, User Manual

Page: 13 / 24

40W Power Amplifier
Altimium 9 www.altimium.com
Figure 8 IR Remote
Figure 9 IR Receiver
4.3 Operations of Control Software
4.3.1 Connection with Computer
When the amplifier connects to the COM1 or COM2 of the computer with control
software, users can control it by that computer.
To control the amplifier, users should use a 3-pole male captive screw to 9-pin HD
female connector and use the public COM software.
IR receiver, works together
with the IR remote. Please
point the IR remote at the IR
receiver when use, to avoid
getting out of control as there
is no signal detected.
3.5mm jack
Insert it into the
specialized PA3
socket (3.5mm), to
connect the IR
receiver with PA3.
Mute Mode:
MIC : Mute the
microphone volume.
LINE : Mute the line
volume.
SPEAKER : Unmute
Use to transmit the
infrared signal send by
the remote controller.
Audio Controlling Modes
MIC : turn up/down the
microphone volume.
LINE : turn up/down the line
volume.
BASS : bass tuning
TREBLE : treble of line
volume.
Audio Source Selection:
1 : 2 RCA dual-mono audio
input
2 : 1 3.5mm jack
3 : 1 Digital fiber audio input