- diameter measurement;
- reset averaging result (on the screen “
-----
”);
14.3. Measurement
· place the gauge onto the wheel
· make sure the ball supports are tight against the roll surface and side sup-
ports are adjacent to the edge of the wheel;
· press
Measure
button; in a 1 second display shows result of measurement
· to continue measurement with averaging press
Measure
button
· display shows the value of pressing counter “
n
x
”, where
x
– quantity of
averaged values;
· in a 1 second display shows an average value over the set of metering (over
the quantity of
Green
button pressings)
· move the gauge to a new position and repeat the measuring.
· Press
Red
button to reset averaging result at switching to another wheel.
15. Database maintenance software
The
ikp5_DB
software is intended for maintaining wheel sets wear database on a personal
computer (the updated version of the program and the user manual are available from Althen
on request).
Page 2 4 /29
