Solar Collector Dimensions
Model No.
AE-21
AE-24
AE-26
AE-28
AE-32
AE-40
MSC-21
MSC-24
MSC-26
MSC-28
MSC-32
MSC-40
Length (
l
)
85.187
97.187
77.187
85.187
97.187
121.187
86.125
98.125
78.125
86.125
98.125
122.125
Width (
w
)
35.187
35.187
47.187
47.187
47.187
47.187
35.875
35.875
47.875
47.875
47.875
47.875
Height (
h
)
3.137
3.137
3.137
3.137
3.137
3.137
3.082
3.082
3.082
3.082
3.082
3.082
Area
20.82
23.75
25.29
27.91
31.85
39.71
21.46
24.45
25.97
28.63
32.62
40.60
Weight
74
84
90
99
113
153
76
87
91
102
116
151
MOUNTING HARDWARE SPACING – Centerline to Centerline (in)
xx
-MH
MSC-MH
86.187
98.187
78.187
86.187
98.187
122.187
88.233
100.233
80.233
88.233
100.233
124.233
xx
-FM
MSC-RRM
88.663
100.663
80.663
88.663
100.663
122.663
87.375
99.375
79.375
87.375
99.375
12.375
xx
-RM
MSC-RM
86.835
98.835
78.835
86.835
98.835
122.835
87.333
99.333
79.333
87.333
99.333
123.333
Dimensions shown (length, width and height) are nominal and listed in inches, area in ft² and weight in lbs. Use the formulas
below for tilted applications.
To calculate the length of the support strut use the formula as follows:
S = 2 x L x sin((
-
) ÷ 2)
Add two (2) inches to the calculated length to allow for the pre-drilled holes, positioned ± 1.0 in from each end
of the support strut.
To calculate the recommended spacing between collectors use the formula as follows:
X = L x cos(
–
) + L x sin(
–
) x tan(90 –
–
)
This would be spacing distance required to insure collectors do not shade one another in stacked arrays or saw-
tooth type mounting configurations.
