AlterG Anti-Gravity Treadmill 400X User Manual Download Page 2

Page: 2 / 54

D000348-00 Rev. B

This manual covers operation procedures for the following AlterG products:

AlterG Anti-Gravity Treadmill, Via 400 and 400X

Note: The following symbol is used throughout this manual to call attention to Warnings, Cautions or

operational procedures that may directly affect the safe operation of the Via 400 Anti-Gravity Treadmill.

Read and understand these instructions and statements before operating the Via 400 Anti-Gravity

Treadmill.

Warning. Cautionary statement or operational procedure that may directly affect the safe

operation of the treadmill.

Note: The Via 400 Anti-Gravity Treadmill has been tested to IEC medical standards for electrical safety.

IEC 60601-1:2005 + A1 2012

IP20

AlterG and Anti-Gravity Treadmill are registered trademarks in the US by AlterG, Inc.

Summary of Contents for Anti-Gravity Treadmill 400X























































Search results

Summary of Contents for Anti-Gravity Treadmill 400X

Reviews:

AlterG Anti-Gravity Treadmill 400X, User Manual, Page: 2 / 54

Search results

Summary of Contents for Anti-Gravity Treadmill 400X

Reviews: