D000161-00 Rev. C
25
Label #1
These labels are located on the top front face of the operator’s screen console. It identifies the
on/off switch used for turning on or shutting down the Anti-Gravity Treadmill, and the USB port.
Label #2
This label is located on areas of the Anti-Gravity
Treadmill frame that present a pinch hazard when the
enclosure is inflated. The metal frame of the Anti-
Gravity Treadmill helps to shape and contain the fabric
enclosure. As the enclosure inflates, the enclosure
expands to touch the frame in the areas where the
labels are placed. Hands or any other part of the body
should not be placed in these areas between the
enclosure and frame.
Label #3
This label is located on the two red safety latches used to secure the oval support frame into the
vertical height adjusters. For your safety, it is critical that you close and lock the latches after
installing the oval support bar and before exercising. The latches should always be closed when
the fabric enclosure is inflated. Never open these latches during exercise or during calibration
when the enclosure is pressurized.
Label #4
The emergency stop label is located at the base of the touch screen on
the surrounding console. It indicates where the safety magnet should be
placed for operation of the Anti-Gravity Treadmill. If the safety magnet
is not placed on the rectangular pad above the words “EMERGENCY
STOP”, the Anti-Gravity Treadmill will not operate. In use, if any sort of
emergency should arise, a tug on the lanyard attached to the magnet will
displace the magnet and stop the treadmill. Always clip the safety
lanyard to your clothing before exercising.
