Altera Cyclone III FPGA Starter Kit, User Manual, Page: 5 / 32

Altera Corporation v
April 2007 Preliminary
About this User Guide
This user guide describes how to start using the Altera
®
Cyclone
®
III
FPGA Starter Kit, including unpacking the kit, installing required
software, connecting the development board to a PC, and running sample
software.
For a full description of the development board and its use, refer to the
Cyclone III FPGA Starter Board Reference Manual .
f
To ensure that you have the most up-to-date information on this
product, go to the Altera website at
www.altera.com/products/devkits/altera/kit-cyc3-starter.html .
Revision History The table below displays the revision history for the chapters in this user
guide.
How to Contact
Altera
For the most up-to-date information about Altera products, refer to the
following table.
Chapter Date Version Changes Made
1 April 2007 1.0.0 ● First publication.
Information Type Contact Note (1)
Technical support www.altera.com/mysupport/
Technical training www.altera.com/training/
Technical training services custrain@altera.com
Product literature www.altera.com/literature
Product literature services literature@altera.com
FTP site ftp.altera.com
Note to table:
(1) You can also contact your local Altera sales office or sales representative.