Altera Arria II GX Reference Manual Download Page 20 | Manualshive

Page: 20 / 64

Altera Arria II GX Reference Manual Download Page 20

2–12

Chapter 2: Board Components

Configuration, Status, and Setup Elements

Arria II GX FPGA Development Board Reference Manual

February 2011

Altera Corporation

Configuration, Status, and Setup Elements

This section describes the board's configuration, status, and setup elements.

Configuration

This section describes the FPGA, flash memory, and MAX

II CPLD EPM2210 System

Controller device programming methods supported by the Arria II GX FPGA
development board. The Arria II GX FPGA development board supports the
following three configuration methods:

■

Embedded USB-Blaster is the default method for configuring the FPGA at any
time using the Quartus II Programmer in JTAG mode with the supplied USB cable.

■

External USB-Blaster for configuring the FPGA using the external USB-Blaster.

■

Flash memory download for configuring the FPGA using stored images from the
flash memory on either power-up or pressing the load image push-button switch
(PB5).

FPGA Programming over Embedded USB-Blaster

The board implements a USB-Blaster using a USB Type-B connector (J6), a FTDI USB
2.0 PHY device (U15), and an Altera MAX IIZ CPLD (U10). This allows the
configuration of the FPGA using a USB cable directly connected between the USB port
on the board (J6) and a USB port of a PC running the Quartus II software. The JTAG
chain is normally mastered by the embedded USB-Blaster found in the MAX

IIZ

CPLD EPM240Z embedded USB-Blaster.

The embedded USB-Blaster automatically disables when an external USB-Blaster is
connected to the JTAG chain.

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

«
...
18
19
20
21
22
...
»

Summary of Contents for Arria II GX

































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands