page 32
of 35
File: SM1180_r9eng - December 2007 - Technical note: SM1180 & TM 060
SM
1180 & TM060
File: SM1180_r9eng - December 2007 - Technical note: SM 1180 & TM 060
page 33
of 35
SM1180 & TM060
How to order
Power supplies:
SM1180D,
input 3x208 V
SM1180T,
input 3x400 V
SM1180U,
input 3x480 V
Versions available:
- version 4:
standard calibrated for YJ1600 magn.
- version 5:
standard calibrated for H3881 magn.
- version 54:
special, separate input to power
control section calibrated for YJ1600
magn.
- version 55:
special, separate input to power
control section calibrated for H3881
magn.
P/N example:
SM1180D.xxx4*/54,
Power supply, input 3x208 V, v. 4/54
SM1180T.xxx4*/54,
Power supply, input 3x400 V, v. 4/54
SM1180U.xxx5*/55,
Power supply, input 3x480 V, v. 4/54
*
Note:
version 4 replace version 3
Pls specify at order the value of the reference signal you have:
0-10 V (standard)
or 0-5 V
or 0-20 mA
Connector/plug set:
p/n
44/SET1180
Remotable Microwave generator
:
TM060.xxxy
Includes the YJ1600 magnetron (but
not the 3 ports isolator).
y = 0 no HV connector, with
connector for reverse power
signal
y = 2 with HV connector, with
connector for reverse power
signal
3 port isolator with dummy load
: several models available:
ask for quote and type.
Cable set:
p/n
441384084
full set, single side
plugs (SM<---)
p/n
441384085
full set, double side
plugs (SMv0-3<--->TMv0).
p/n
441384089
full set, double side
plugs (SMv0-3<--->TMv2).
Standard lenght 3 mt; other lenght on
request.
Reverse power amplifier assembly
: p/n
90 0000 111
Includes a diode detector with BNC
connector, a 500 mm shielded cable
with connectors, an aluminium box
containing the amplifier of the reverse
signal with 0-10 V analog output
(main supply 230 V)
replaced by:
Linear Power Sensor:
p/n
86RD8400A1
output signal 0 - 10V, 1 channel
p/n
86RD8400A2
output signal 0 - 10V, 2 channels
Coax cable:
p/n
441384800
lenght 610mm, with
“SMA” and “N” connectors, 0°
p/n
441384801
lenght 500mm, with
“SMA” and “N”, 90°
Note about part number: “xxx” set the custom code, while the
last digit is the version number and it’s printed on the product
label.
Alter reserves the right to improve or modify this products,
at any time, without obligation to notify any person or
entity of such changes.
No part of this publication may be reproduced without the
express written consent of Alter.
All rights reserved.
Technical assistance
Alter s.r.l
42100 Reggio Emilia - ITALY
Tel: ++39 0522 553 820; fax ++39 0522 553 577
Web: www.altersystem.com
NOT FOR NEW
APPLICA
TION