Installation
Instruction manual 91/121 V6.3
Drawing 2
Connection from a DC power line
NOTE:
A DC motor shall be connected between terminals A and C. Terminal B shall remain empty.
4.1 Preliminary operations
•
Check that the drive has suffered no damage in the transport.
•
Mount the drive vertically away from heat sources and so that there is sufficient free space above and below for good cooling
air circulation.
•
Use unpainted sheet fixing panels connected to the ground.
•
Connect to a good ground the ground terminal placed on the right side of the drive terminal.
•
Follow the link patterns in the manual carefully.
•
Use shielded cables for signal and power connections.
•
Connect to the ground on the case or on the terminals arranged on the two ends of the screens.
•
Do not use terminal blocks but only shielded connectors for signal and power shielded cable junctions.
12
Alter Elettronica s.r.l.
