Page-3
Self-Adhesive Cable Tie
Wiring the NP17AV
A rubber cable grommet is provided on the enclosure which allows speaker,
Ethernet or any other types of cables to be connected to the device mounted
inside the enclosure. An internal 120VAC power outlet can be used to deliver
power to the installed device. To provide power to the enclosure, simply plug the
enclosure’s
5 foot power cord into a 120VAC outlet. Self-adhesive wire ties are
included with the NP17AV and can be attached to the back plate to help with
cable management.
5 Foot Power Cord
Cable Grommet
Outdoor Version Shown
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 [email protected] www.altelix.com
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
Shown with Sonos Amp
Not included
SONOS® is a trademark or registered trademark of SONOS, Inc.
NP17AV Installation Guide
IS0107 Rev A 04/05/19
