14
Make sure that you have an adaptor.
Ensure that the power leads to both the TV monitor and the Set Top Box are
unplugged before you commence the set up procedure.
3.2. Connecting Video and Audio
Video
Connect the yellow RCA cable from the VIDEO output of the Set Top Box
to the VIDEO input of the TV monitor.
Audio
a) Connect the red and white connectors of the RCA lead to the
corresponding colored audio output connectors on the rear of the Set Top
Box.
b) Connect the other end of the cable to the corresponding colored
connectors on your television monitor.
c) Can use SPDIF /COAXIAL audio connection as well if available
3.3. Connect the antenna
Connect the antenna lead to the “ANTENNA IN” connection on the rear of
the Set Top Box.
3.4. Connect the power
a)
Plug the connector of the power line of the receiver into the socket.
b)
Connect the power to your monitor and turn it on, you are now ready to
get started.
4. SET UP- Amplifier
For this
Set Up, use your preferred video connection, the example below
shows video connection via YPbPr (component), you can use other methods
from the previous examples. You will also need an Optical cable for the
audio set up.