background image

27

 

 

WARRANTY CERTIFICATE   

WARRANTY CERTIFICATE FOR DT3900RF

 

Complete  the  details  on  this  form  and  retain  in  the  event  of  warranty service  being  required  (purchase  receipt 

attached)   

PURCHASER’S NAME: ___________________________________   

ADDRESS: CITY   STATE   

                              POST CODE   

DATE OF PURCHASE                                    INVOICE/SALES DOCKET NO__________   

TERMS OF WARRANTY 

 

Altech  UEC  provides  12  month  manufacturers warranty for  FAULTY  MATERIAL  or  WORKMANSHIP  for  the 
DT3900RF from the original date of purchase. Such defect will be rectified, without cost to you for either labour or 
material, at the premises of Altech UEC or their Authorized Service Centre.   

This warranty is subject to the following terms and conditions:

   

1. Proof of purchase must be produced when a warranty claim is made. Particulars of the model and serial number, 
the date of original purchase and invoice/sales docket number being provided to the authorized service centre when 
a claim under warranty is made.   
2.  All  (a)  damage  resulting  from  incorrect  installation  or  use  other  than  in  accordance  with  the  operating 
instructions issued by the Company (b) incidental or consequential damage, being excluded from this Warranty.   
3. If the product is misused, any unauthorized alteration, modification, substitution of any part of the product be 
made or the serial number of the product is defaced or altered than the warranty will be rendered invalid.   
4.  Cost  of  transportation  both  ways  to  and from  the  authorized  service  centre  being  met  by  the  owner  if  it  is 
necessary to return the product or any part to an authorized service centre. Altech UEC accepts no responsibility for 
damage in transit to and from his premises   
5. This Warranty is only applicable in Australia.   
6. In home warranty is not covered by ALTECH UEC.   
7. The hours for service are during normal business hours, Monday to Friday not including public holidays.   
8. If the product or any parts returned to an authorized service centre for any cause is not covered by this warranty, 
all costs involved, including a charge for inspection and handling must be paid to the authorized service centre   
9. Terms of above warranty can not be varied without consultation with ALTECH UEC.   
10. This product must be solely used for domestic purposes.   
11. The warranty shall not apply to remote control batteries or any other part with limited life.   
If any legislation whether Federal or State applies to this transaction, certain non-excludable conditions and may be 
implied  and  certain  non-excludable  rights  may  arise  but  except  for such conditions  and warranties which  might 
otherwise be implied in this transaction are hereby excluded and negated.   

FOR WARRANTY SERVICE, PLEASE CONTACT  THE RETAILER FROM WHOM YOU  PURCHSED 
YOUR UNIT OR CONTACT Service on 02 9425 5777

 

Altech UEC Pty)Limited 

 

27 Sirius Road 

 

Lane Cove West 2066 

 

NSW 

 

www.uec.com.au 

 

[email protected]

 

 

Summary of Contents for DT2900





























Reviews: