Altech AR 4070KF2E, Installation Manual

Page: 69 / 72

69
Adjustable setback (2 K to 6 K)
Temperature Setback Mode
Komfort KF2E
Control response of the AR 4070KF2E
Thermostat performance in reduced operation mode
The desired minimum floor temperature (pos. 1-6) will not
be affected for the duration of the setback phase. If only
the external sensor is used (ext.), the desired temperature
from the dial will be adjusted (lowered) by the value pre-
programmed in the Basis Wireless.
Thermostat performance in Cooling mode:
The desired minimum floor temperature (pos. 1-6) will not
be affected for the duration of the setback phase. If only
the external sensor is used (ext.), the desired temperature
from the dial will be adjusted (raised) by the value pre-
programmed in the Basis Wireless.
For the reduced operation mode, the temperature differ-
ence in the Basis Wireless is pre-programmed to 2 Kelvin,
and can be adjusted from 2 to 6 K in 0.1 K steps using the
Wireless Inspector. This modification ill then apply to the
entire Wireless Basis.
If the energy saving mode (temperature setup) is activated
in the COOLING mode, the desired temperature is raised.
Energy is saved.