Rear Hub
Ribbon
Lead Tape
Ribbon Rewind Spindle with Paper Core
Ribbon supply spindle
Fig. 5 Ribbon installation (II)
3.3 Loading Label Stock
1.
Insert a 1” label spindle into a paper roll ( *
I
f your paper core is 1 inch,
remove the 1.5” core adapter from the fixed tab. If label width is 4 inch wide,
two fixing tabs are not required. ).
Fixed Tab
1” Label Spindle
Paper Roll
1.5” Core
Adapter
*
Printing Side
Face Up
Fig. 6 Label roll installation (I)
2. Open the printer’s top cover by releasing the green top cover open levers
located on each side of the printer and lifting the top cover. A top cover
6
