ALTEC industrial identification B.V.
Nieuwland Parc 90
•
3351LJ
•
Papendrecht
•
The Netherlands
T +3178 - 615 20 33
•
•
www.altec.nl
TROPHY
MARKER
User manual
Place labels and ink ribbon
Place ink ribbon
A.
Open the transparent
cover by pushing it down.
B.
Insert the first ink ribbon
spindle (black) in the ink
ribbon roll. Make sure the
ink ribbon unwinds at the
backside and the rim of the
label spindle is on the right
side (as shown in image).
C.
Install the black spindle
including the ink ribbon on
the rear axle. First place it
left and while pushing the
spring, place it right.
Note:
The rim of the label
spindle should be on the
right.
D.
Insert the the other black
spindle into the cardboard
waste roll.
E.
Install the black spindle
including the waste roll on
the front axle. First place it
left and while pushing the
spring, then place it right.
Note:
The rim of the label
spindle should be on the
right.
F.
Open the top of the
printer using the green
latches on both sides of the
printer and lift it up. It will
lock in an open position.
G.
Move the first part of the
ink ribbon underneath the
printhead and attach it to the
cardboard waste roll (with
adhesive tape for example).
H.
Rotate the ink ribbon
until the Altec packaging film
is gone and the black part
reaches the waste roll.
Instruction video
Place ink ribbon
