FCC STATEMENT
9.
SPECIFICATIONS
10.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Power Audio:
120W (RMS)
2.0 Channel
240 W (PMPO) Total
Driver Units:
5.25”*4+2.25”*4
Frequency Response:
Satellite:
120Hz-20KHz
Subwoofer:
20Hz-170Hz
Separation
:≥40dB
S/N:
≥70dB
Distortion:
≤0.5%
（
1K,1W)
Power Supply:
~120V/60HZ
Dimensions:
Subwoofer:
W172xH830xD343(mm)
Satellite:
W172xH830xD343(mm)
Summary of Contents for POWER DUO ABT385
Page 1: ...ITEM NO ABT385 Quick Start Guide ...
Page 9: ...SAFETY PRECAUTIONS 8 ...
