Altec Lansing ACS295, User Manual

Page: 8 / 12

8
Figure 2
• ON/OFF SWITCH: To turn the unit on, press the
POWER switch. A yellow indicator next to the switch will
glow to show the power is on. Press the switch again to
turn the power off.
• MASTER ROTARY LEVEL CONTROL: The rotary master
level control operates in two modes. Whenever the
BASS or TREBLE function is selected, the volume level of
that function can be adjusted up or down by the
rotary control. Once each function is adjusted to the
desired level, the mode of operation reverts to the
rotary control after a short period. The rotary control
then performs as a master LEVEL control adjusting the
volume of all speakers simultaneously.
•TREBLE/BASS CONTROLS: To raise or lower treble or
bass response, press the switch next to each mode
selector, a green indicator will glow to show the
function is operational. Turn the ROTARY control
clockwise to increase response and counter-clockwise
to decrease response. Once the level is set, the
indicator next to the function will turn off after a short
period. Each function can be turned off quickly by
pressing the function button a second time. To reset
the Treble and Bass controls to their factory, preset
(flat) position depress and hold the corresponding
button for a period of approximately three seconds.
Use of Top Panel Controls on Right Satellite Speakers (See Figure 2)
The green indicator will go out denoting the control
has been reset. Once the green indicator is off, the
master level control becomes operational.