![background image](http://html1.mh-extra.com/html/altec-lansing/acs295/acs295_user-manual_2910009010.webp)
ACS295 Specifications
Satellites
Drivers
One 3 inch full range
One 1 inch tweeter
Satellite Power
7 Watts RMS (Per Channel)
THD
<0.8% @ 1 Watt @ 1kHz
Treble Control
±9dB @ 7kHz (3dB Steps)
Bass Control
±9dB @ 150Hz (3dB Steps)
Subwoofer
Driver
One 6 inch long throw
Subwoofer Power
20 Watts RMS
THD
<0.8% @ 1 Watt @ 100Hz
Power Requirements
USA/CANADA Model
120 Volts 60Hz AC
United Kingdom Model
240 Volts 50Hz AC
European Model
230 Volts 50Hz AC
MAX Power Consumption
120 Watts
UL/CUL/CE Approved
System
Frequency Response
35Hz – 20kHz
Input Impedance
>10k Ohms
Input Sensitivity
500mV for full output
Signal-to-Noise Ratio
>65dB
Crossover Frequency
(Subwoofer)
150Hz
Fuse Type*
1 AMP 250V
“Slow Blow” (5x20mm size)
*Before replacing fuse remove AC power plug from the
wall outlet. To replace fuse, twist fuse cap
counterclockwise with a standard flat head screwdriver.
The fuse cap is spring loaded and will “pop” out.
NOTE: IF THE FUSE NEEDS REPLACEMENT USE A 250 VOLT,
1 AMP “SLOW BLOW” 5 X 20MM UL/CSA APPROVED TYPE.
Summary of Contents for ACS295
Page 2: ...2...
Page 12: ...Figure 1...