Altec AIR CO2-PG80 Purge Gas Generator Operations and Maintenance Manual
SECTION 9 WIRING
FIG 5
CO2-PG80 WIRING DIAGRAM
SECTION 10 WARRANTY
Altec AIR warrants the CO2-PG80 Purge Gas Generator to be
free of defects in materials and workmanship under proper use,
installation and application. This limited warranty shall cover
parts or replacement unit only, for a period of 18 months from
date of shipment or 12 months from date of installation,
whichever comes first.
ALL
FREIGHT
DAMAGE
CLAIMS
ARE
NOT
THE
RESPONSIBILITY OF THE MANUFACTURER AND ARE NOT
COVERED UNDER WARRANTY AS ALL PRODUCTS ARE
SHIPPED F.O.B. SHIPPER. PLEASE DIRECT ALL FREIGHT
CLAIMS TO THE FREIGHT CARRIER IN QUESTION.
This warranty does not apply to any unit damaged by accident,
modification, misuse, negligence, or misapplication.
Any covered CO2-PG80 Purge Gas Generator part or material
found defective will be repaired, replaced or refunded, at Altec
AIR
’s option, free of charge, provided that Altec AIR is notified
within the above stated warranty period. All returns of defective
parts/equipment must have prior written Returned Material
Authorization (RMA). RMA may be obtained from our service
department. All defective parts/equipment must be returned
freight prepaid to the Altec AIR factory within 30 days of RMA
issue date. Any shipment returned to the factory collect will be
refused.
If an item is found to be warrantable, the repaired item or
replacement will be shipped via standard ground freight prepaid
within the continental US and Canada.
Any replacement part or material is warranted only to the extent
of the remaining warranty period of the adsorber/dryer or to the
extent as provided by the supplier, whichever is longer.
All freight damage claims should be filed within 15 working
days and should be directed to the freight carrier.
Page 8
P/N P013253 REV B
Tel: 800-521-5351
226A Commerce St., Broomfield, CO. 80020
