![Altana BYK spectro-guide 45/0 gloss Manual Download Page 43](http://html1.mh-extra.com/html/altana/byk-spectro-guide-45-0-gloss/byk-spectro-guide-45-0-gloss_manual_2909102043.webp)
42
Options
10.3
Gloss
From the “Options” menu, use the button
to move the cursor to the “Gloss” option.
The submenu will open when you press the
Operate button. Move the cursor to “Gloss on”
and confirm your choice by pressing the Operate
button.
The instrument will return to the measuring mode.
If you are in the “Display/Sample Mode” and take
a reading with the Operate button, the display will
show the values of the sample.
You can now either save the measured value as
Standard or as Sample. See Chapter 7.2.
When entering the tolerances you will also be
prompted to enter a gloss range.
Enter the respective values and confirm your
choice by pressing the Operate button.
If you are in the “Display/Differences” mode, the
color and gloss values of the sample are displayed
on the left side, and the differences to the standard
are shown on the display’s right side.
The color and gloss tolerances are taken into
account in the Pass/Fail mode. If the gloss value
is outside the entered tolerance range, a message
will be displayed in the form of
↑
(higher gloss) or
↓
(lower gloss).
Summary of Contents for BYK spectro-guide 45/0 gloss
Page 58: ...57 Setting Custom1 Setting Custom2 Options...
Page 74: ...250 020 858 E 1105...