Installation Overview
1.
Mount PowerLogger 1000
1.1.
Connect 24 VDC power to the top of PowerLogger 1000.
1.2.
Connect Ethernet cable from LAN network.
1.3.
Connect the MODBUS RS485 devices to the PowerLogger 1000 in port 1 or 2.
PORT 1
PORT 2
GROUND
10
14
DATA +
11
15
DATA
−
12
16
SHIELD
13
17
*
TR
is a 120
Ω
termination resistor.
Jump TR to Data- if termination is required.
There will be two wires on the Data- terminal.
1.4 After all connections are complete turn power on.
2.
Loading Screen
On power on the loading screen appears, the logger program will start in 30 seconds.