Network Camera User Manual
59
and DDNS information.
5.2.
Port Mapping
Port mapping is mapping a port of outside web host’s IP address to a machine inside web, and provide
the service. When user connects to the port of the IP, the server will automatically map the request to
the corresponding machine inside LAN.
With the function of port mapping, we can map many ports of a machine’s IP address to different
machines’ different ports inside web. The port mapping can also have other special agent functions, like
POP, SMTP, TELNET, etc. Theoretically, it can provide more than sixty thousand ports.For example, if we
want to map a web server which has an IP address of 192.168.111.10, we just need to input the IP
address and TCP port 80 into the port mapping chart of the router.
There are two ways to map the port: UPnP function of automatically map and modify the router’s port
mapping chart by manual.
5.2.1.
UPnP Function
In order to get connection to the Embedded IPC through Public network, we need to set the Router to
cross the NAT of Embedded IPC. UPnP can make the NAT cross automatically by the UPnP agreement of
Embedded IPC, and don’t have to set the Router.
Note: to realize the UPnP Function, there must be Router support and enable the UPnP Function.
The first step
Connect the Router to the network, get to the Menu of the Router, set the Router, then get to port, and
enable the UPnP Function.
Routers made by different manufacturers may have some difference, please refer to the specification
carefully before setting the Router.
The second step
Connect the Embedded IPCto the Router; the configuration will automatically gain the IP address or static
IP. After setting up the IP, click the Advanced Config. And get to
【
the Network transmission capacity, ports
and multicast etc.
】
to open the Enable at the
【
UPnP port mapping
】
.
Summary of Contents for IPT404I-3310WISD-M
Page 1: ...Network Camera User Manual...