Network Camera User Manual
27
Figure 4-30 Retrograde
This is retrograde function. You should enable and set rules first.
1) Enable the retrograde(if can’t enable, please check whether you enable the motion
detection, disable it, then enable the retrograde).
2) Then draw rules. You will draw region and line.
3) Back to the live view page. You will see the rule you drew. Click the alarm snapshots, and
tick the retrograde, If event occurs, you will see the snapshots in the “Display alarm
subscription”.
Figure 4-31 Display alarm subscription
Tip:the setting button is time setting,click setting button ,will see the photo,you can in there setting time.
Summary of Contents for IPT404I-3310WISD-M
Page 1: ...Network Camera User Manual...