60 Watt Transformer
WARNINGS AND CAUTIONS
WARNING
• Risk of Electrical shock. Install only to a
covered Class A GFCI receptacle that has an
enclosure that is weatherproof with the
attachment plug cap inserted or removed.
• Risk of Electrical shock. Mount the unit at a
height greater than 1 foot from the ground
surface.
• Risk of Fire. Installation involves special wiring
methods to run wiring through a building
structure, consult a qualified electrician.
• Risk of electric shock, do not remove the cord
and strain relief.
• Do not remove the grounding pin from the
power cord plug.
• Do NOT submerge the Transformer.
•
Risk of electrical shock
– This transformer kit
has not been investigated for use in swimming
pool or marine areas.
CAUTION
• Use a proper power source as indicated on the
Transformer label.
• Keep the cord away from high temperatures or
other heat sources.
• TRANSFORMER CAPACITY: Make sure that
the total number of lights connected to the
Transformer does not exceed the transformer
60-watt output capacity.
• Do not use with a dimmer.
• Lighted lamp (not included) when attached gets
hot quickly!
PREPARATION
Before beginning assembly or operation
of
product, make sure all parts are present.
Compare parts with package contents list on the
cover and diagram on the reverse side of this
document. If any part is missing or damaged, do
not attempt to assemble, install or operate the
product. Contact customer service for
replacement parts.
• Estimated Assembly Time: 5 minutes
• No tools required for assembly
.
LIMITED WARRANTY
This warranty is offered to you as an extra benefit
and does not affect your rights as a consumer in
any way. This unit has been checked for
compliance to performance requirements at the
time of manufacture and are made in accordance
with the requirements set forth in UL1310 to
insure safe operations over the life of the product.
This Transformer Kit is warranted against
manufactured defect for one (1) year from the
date of purchase. Proof of purchase is required
for all warranty claims. The warranty is not valid if
defects are caused by tampering, negligence,
misuse or not observing safety warnings. No
responsibility is assumed for indirect damage that
may result from the use of this appliance.
The warranty does not apply to or cover damages
or defects caused by external causes, including,
but not limited to, improper or faulty installation or
unauthorized modification, lightning, electrical
surges, abuse, misuse or abnormal use or
misapplication, including use in a manner
inconsistent with the product’s intended function.
The purchaser is responsible for determining the
suitability of the product for its intended use. If
products are damaged in transit, a claim should
be filed with the carrier.
This warranty does not cover the AG-85 high
intensity halogen bulb. (Not included)
ASSEMBLY INSTRUCTIONS
1.
(Fig. 1)
Connect the light(s) to the sensor by
pushing the plug into the sensor socket until it is
firmly seated. Hand tighten the nut from the plug
to the socket.
2.
(Fig. 2)
Connect the sensor to the transformer
by pushing the plug into the transformer socket
until it is firmly seated. Hand tighten the nut from
the plug to the socket.
3. Place the light in or out of water. DO NOT
SUBMERGE the transformer and sensor.
Make sure the light sensor faces up.
NOTE: At night, the lights will automatically turn
on. At sunrise, they will automatically turn off.
4.
(Fig. 3)
Plug the transformer into a properly
grounded electrical outlet.
Fig. 1
Sensor
Plug from lights
(Not included)
Fig. 2
Plug from
sensor
Photo-eye must face up
to receive light during
daytime
GFCI
Fig. 3
