WARNINGS AND CAUTIONS
WARNING
• Risk of Electrical shock. Install only to a
covered Class A GFCI receptacle that has an
enclosure that is weatherproof with the
attachment plug cap inserted or removed.
• Risk of Electrical shock. Mount the unit at a
height greater than 1 foot from the ground
surface.
• Risk of Fire. Installation involves special wiring
methods to run wiring through a building
structure, consult a qualified electrician.
• Risk of electric shock, do not remove the cord
and strain relief.
• Do NOT submerge the Transformer.
•
Risk of electrical shock
– This submersible
light kit has not been investigated for use in
swimming pool or marine areas.
CAUTION
• This light kit has been evaluated for use in or
above water only.
• Use a proper power source as indicated on the
Transformer label.
• Keep the cord away from high temperatures or
other heat sources.
• TRANSFORMER CAPACITY: Make sure that
the total number of lights connected to the
Transformer does not exceed the transformer
10-watt output capacity.
• Do not use the light in water less then 50° F or
exceeding 104° F.
• Do not use with a dimmer.
• The light is not to be used in swimming pools or
spas.
• Lighted lamp gets hot quickly!
• Do not touch hot lens, guard or enclosure.
PREPARATION
Before beginning assembly or operation
of
product, make sure all parts are present.
Compare parts with package contents list on the
cover and diagram on the reverse side of this
document. If any part is missing or damaged, do
not attempt to assemble, install or operate the
product. Contact customer service for
replacement parts.
• Estimated Assembly Time: 5 minutes
• No tools required for assembly
.
LIMITED WARRANTY
This warranty is offered to you as an extra benefit
and does not affect your rights as a consumer in
any way. This unit has been checked for
compliance to performance requirements at the
time of manufacture and are made in accordance
with the requirements set forth in UL1310 to
insure safe operations over the life of the product.
This light is warranted against manufactured
defect for one (1) year from the date of purchase.
Proof of purchase is required for all warranty
claims. The warranty is not valid if defects are
caused by tampering, negligence, misuse or not
observing safety warnings. No responsibility is
assumed for indirect damage that may result from
the use of this appliance.
The warranty does not apply to or cover damages
or defects caused by external causes, including,
but not limited to, improper or faulty installation or
unauthorized modification, lightning, electrical
surges, abuse, misuse or abnormal use or
misapplication, including use in a manner
inconsistent with the product’s intended function.
The purchaser is responsible for determining the
suitability of the product for its intended use. If
products are damaged in transit, a claim should
be filed with the carrier.
This warranty does not cover the AG-85 high
intensity halogen bulb.
ASSEMBLY INSTRUCTIONS
1.
(Fig. 1)
Connect the light to the transformer by
pushing the plug into the transformer socket until
it is firmly seated. Hand tighten the nut from the
plug to the socket.
2. Place the light in or out of water. DO NOT
SUBMERGE the transformer.
3. (Fig. 2)
Plug the transformer into a properly
grounded electrical outlet.
Fig. 1
Plug from
light
Fig. 2
Transformer
GFCI
